Ubiquiti LBE-5AC-Gen2-LiteBeam 5AC Generation2



15 People watching this product now!

Fast Shipping

Carrier information

20k products

Payment methods

24/7 Support

Unlimited help desk

2-day Delivery

Track or off orders

Reviews (0)


There are no reviews yet.

Be the first to review “Ubiquiti LBE-5AC-Gen2-LiteBeam 5AC Generation2”

Your email address will not be published.


Ubiquiti Networks AC Gen2 Overview

With tighter beamwidth, the LiteBeam AC Gen2 Airmax ac CPE with Dedicated Management Radiofrom Ubiquiti Networks offers a more reliable long-distance point-to-point connection. This LiteBeam radio is designed to filter out noise to reduce interference in areas congested with multiple RF signals. Setup is simple thanks to fully adjustable hardware allowing for adjustments to be made along both axes as well as a built-in bubble level to ensure the radio is mounted properly.

Improved Noise Immunity
The LiteBeam 5AC Gen2 directs RF energy in a tighter beamwidth. With the focus in one direction, the LiteBeam 5AC Gen2 blocks or spatially filters out noise, so noise immunity is improved. This feature is especially important in an area crowded with other RF signals of the same or similar frequency.
Integrated Design
Ubiquiti’s InnerFeed technology integrates the radio into the feedhorn of an antenna, so there is no need for a cable. This improves performance because it eliminates cable losses. Featuring high performance and innovative mechanical design, the LiteBeam 5AC Gen2 is versatile and cost-effective to deploy.
Powerful Wireless Features

  • Access Point PtMP airMAX Mixed Mode
  • airMAX ac Protocol Support
  • Long-Range Point-to-Point (PtP) Link Mode
  • Selectable Channel Width
  • PtP: 10/20/30/40/50/60/80 MHz
  • PtMP: 10/20/30/40 MHz
  • Automatic Channel Selection
  • Transmit Power Control: Automatic/Manual
  • Automatic Distance Selection (ACK Timing)
  • Strongest WPA2 Security

Usability Enhancements

  • airMagic Channel Selection Tool
  • Redesigned User Interface
  • Dynamic Configuration Changes
  • Instant Input Validation
  • HTML5 Technology
  • Optimization for Mobile Devices
  • Detailed Device Statistics
  • Comprehensive Array of Diagnostic Tools, including RF Diagnostics and airView Spectrum Analyzer
UMobile App
Accessing airOS via Wi-Fi
The UMobile App provides instant accessibility to the airOS configuration interface and can be downloaded from the App Store (iOS) or Google Play (Android). UMobile allows you to set up, configure, and manage the LiteBeam 5AC Gen2. It offers the following options once you’re connected or logged in to the device:

  • Check link status information or the basic configuration settings of the LiteBeam 5AC Gen2
  • Change or update the existing configuration of the LiteBeam 5AC Gen2
  • Access tools for initial installation and configuration of the LiteBeam 5AC Gen2
  • Back up or update the configuration, upload new firmware, reboot the device, reset the device to factory defaults, access the airOS UI in the web browser, or disconnect from the LiteBeam 5AC Gen2
Full Adjustment Flexibility
The LiteBeam 5AC features a two-mount system that provides adjustment flexibility along both axes for versatile mounting options. The mounting system, coupled with the built-in bubble level, enables quick and easy alignment.

Improved Mounting and Surge Protection
Featuring enhanced protection against power surges, the LiteBeam 5AC Gen2 offers a more robust mount with separate azimuth and elevation adjustments.


Ubiquiti Networks AC Gen2 Specs

Power Supply 24 V, 0.3 A Gigabit PoE adapter (included)
Power Consumption Maximum Power Consumption
7 W
Power Method Passive PoE (pairs 4, 5+; 7, 8 return)
Voltage 24 V ± 10%
Operating Frequency Worldwide
5150 – 5875 MHz
5150 – 5250 MHz
5250 – 5350 MHz
5470 – 5725 MHz
5725 – 5850 MHz
Gain 23 dBi
Networking Interface 1 x 10/100/1000 Ethernet port
Processor MIPS 74Kc
Memory 64 MB DDR2
LEDs Power, Ethernet
Channel Sizes PtP Mode
10/20/30/40/50/60/80 MHz
PtMP Mode
10/20/30/40 MHz
Enclosure Reflector (SGCC 0.6T)
Plastic: PC
Mounting Pole-mounting kit (included)
Wind Loading 61.8 lbf @ 125 mph (275 N @ 200 km/h)
Wind Survivability 125 mph (200 km/h)
ESD/EMP Protection ± 24 kV Contact / Air
Temperature & Humidity Operating Temperature
-40 to 158°F (-40 to 70°C)
Operating Humidity
5 to 95% Non-condensing
Certifications CE, FCC, IC
Dimensions 14.09 x 10.71 x 10.73″ (358 x 271.95 x 272.5 mm)
Weight Without Mount
1.76 lb (800 g)
With Mount
2.16 lb (980 g)
Packaging Info
Package Weight 3.55 lb
Box Dimensions (LxWxH) 12.2 x 6.7 x 4.9″